FUJITSU DL3800 User Manual

Page 179

Advertising

Specifications

User's Manual

B-7

PRINTER AND PAPER SPECIFICATIONS

Print area for continuous forms

Print area

May be
decreased to
4.23 mm
(1/6 inch).
However, line
spacing may be
uneven.

Perforation

5.08 mm or more

(0.2 inch or more)

102 mm

(4 inches)

or more

Paper end

25.4 mm (1 inch)

Print area may be off the
paper, depending on
paper setting or width.

Print area

102-266.7 mm (4-10.5 in)

for 80-column printer

102–420 mm(4–16.5 in)

for 136-column printer

5.08-25.4 mm (0.2-1 in)

for 80-column printer

5.08–32 mm (0.2–1.3 in)

for 136-column printer

Approx. 80 mm (3.2 inches)
for push-tractor feed
Approx. 35 mm (1.4 inches)
for pull-tractor feed

25.4 mm (1 inch)

Print head position when
paper end is detected,

selectable by setup mode.

Printing

resumable

Approx. 4.7 mm (0.18 inches):
Resume printing is allowable
to single-part paper only and
selectable by setup mode.

#B Appendix B

2000.09.20, 2:51 PM

Advertising