FUJITSU DL3800 - Manual (Page 33)

Setting Up
SETTING UP
User's Manual 2-11
Looking at the printer from the back with the cut sheet stand and back
cover removed, you can see the following parts of the printer:
Acoustic cover
Rating label
Power
connector
Back cover
Forms tractors
Cut sheet stand
Top cover
Printer components (rear)
Before you plug in the printer:
√
Make sure that the printer power is switched off. The side
marked “1” on the power switch should be raised.
√
Make sure that the power outlet is properly grounded.
√
Make sure that you use the power cord shipped with the
printer. This cord is designed to minimize radio frequency
interference.
CONNECTING THE POWER
CORD
#02 Chapter 2 2000.09.20, 2:31 PM 11