Frymaster Electric Cooker 8C - Manual (Page 22)

5-6
Operator Troubleshooting Guides (Continued)
WATER
TEMPERATURE
IS TOO LOW IN
SIMMER MODE.
Adjust controller in
accordance with
procedure in Chapter 4.
Did water
reach correct
temperature?
Problem resolved.
Is a controller
known to be working
available?
Substitute the controller
known to be working fo
the suspect controller and
attempt to operate unit.
Probable cause is open
temperature probe or loose
probe wire. Call FASC.
Did water
reach correct
temperature?
Problem is a failed controller.
Order replacement from FASC or
distributor.
No
No
Yes
Yes
No
Yes