Frymaster 1824G - Manual (Page 27)

5-5
5.5 FILTERING INSTRUCTIONS (cont.)
G. Clean the filter pan thoroughly and
ensure all components are completely
dry.
H. Follow directions outlined in Section 5.4-
Filter Preparation, pages 5-2 – 5-3.
5.6 FILTER OPERATION
1. Turn the fryer OFF and allow the oil to cool for a minimum of 10 minutes before draining oil into
filter pan.
2. Immediately before draining, use correct straining method to collect large debris suspended in
oil.
3. Open the frypot drain valve.
4. Squeegee the frypot sides to remove any
debris. Use the clean-out rod to clear the
drain if necessary.
LJS 24G drain valve location.
Ensure filter pan and all components are clean
and dry before installing filter leaf assembly
and crumb tray.