FUJITSU XG2000 User Manual
Page 17
Parts List
15
1
• Rack Mounting Brackets Brackets for mounting the XG2000 in a rack. Attach each rack
mounting bracket to the right and left sides of the XG2000, and
fasten to the rack posts with the rack screws (large).
• Rack Mounting Bracket B
A bracket for mounting the XG2000 in a rack. Attach the rack
mounting bracket B to the back-right and back-left sides of the
XG2000, and fasten to the rail (attached to the back-right rack
post) with the rack screws (small).
• Rail R
A rail that are attached to the back-right rack post and into
which the back rack mounting bracked are slid and fastened
when mounting the XG2000 in a rack.
• Rail L
A rail that are attached to the back-left rack post and into which
the back rack mounting bracked are slid and fastened when
mounting the XG2000 in a rack.
• Rack Nuts
When the rack post holes are round, use the rack nuts to fas-
ten the XG2000 and the rails to the rack posts with the rack
screws (large).
• Cage Nuts
When the rack post holes are square, use the rack nuts to fas-
ten the XG2000 and the rails to the rack posts with the rack
screws (large).
• Rack Screws (Small)
Flat-head screws for fixing the rack mounting brackets and
rack mounting bracket B to the XG2000, and fixing the rack
mounting bracket B to the rails.
• Rack Screws (Large)
Pan-head screws for fixing the XG2000 and the rails to the
rack posts.