Furuno FR-1500 - Manual (Page 35)

-1.21-
1.25 Electronic Plotting Aid (EPA)
10 targets can be plotted electronically to assess their motion trend. Five past positions can be
displayed for each target. Working range of EPA is 0-48 nm irrespective of range scale. Note that
EPA is disabled when the ATA (ARP-17) is accommodated.
Target data is shown in the data display area including range, bearing, course, speed, CPA and
TCPA of the last-plotted or selected target.
EPA SYMBOLS
○
Target plotted
□ Plotted target and the data being read
Flashing: Targets in Target Alarm Zone
△
Target on a collision course
Target 2 is on a collision course as the extension of its
vector goes through the own ship position. Placing the
offset EBL will help for assessment. TCPA is counted
up to 99.59 min and beyond that it is indicated as
TCPA > 99.99 min.
Note:
Plots will be lost when the compass or speed log fails.
1.25.1 Plotting a target
1. Place a cursor on a target of interest and press the
[PLOT SYMBOL] key. The target position changes
with a calculated speed and course every 1-2 seconds
by the auto follow-up feature, maintaining the
calculation origin at point (a). If option (7) TRACK is
ON, tracked positions are indicated by dots.
2. In more than 30 seconds but within 10 minutes, place the cursor on the latest calculated
position (b) and press the [ENTER/SELECT] key. The plot symbol changes from ○ to □. This
step is to identify the target on which you want the plotting data.
3. Place the cursor on the target within 5 seconds, maybe at a different location due to leeway at
(c), and press [PLOT SYMBOL] key. The vector will be drawn based on a trip between (a) and
(c). The target data is indicated in the text area to the right. Correction of plot position (c’), if
necessary, is possible within 5 seconds, to show the course made good and speed made good
(a-c’).
4. Do the same for other targets (maximum 10). For targets already in auto follow-up, do steps 2
and 3.
+
(b) Latest calculated
position
(a) First plot position
(c) 2nd plot position
+
(c') Re-entry for correction
000 010 020
030
040
050
060
070
080
090
100
110
120
130
140
150
160
170 180 190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340 350
3
1
RNG 4.7NM
BRG 41.5°T
CSE 198.0°T WT
SPD 10.3K WT
CPA 0.9NM
TCPA 15:20
MAN 00:01
3 TRUE VECT
3Min WT
2
1
TAZ