Furuno FR-1500 - Manual (Page 55)

-1.41-
1.47.2 Making a radar map
Mark entry
Marks can be entered in three different ways.
1. Press the [MENU] key and the [8] key twice to display
the MARK menu.
2. Press the [4] key to select the entry mode: Cursor, L/L
or OS Position. For L/L, key in position with the numeral
keys. Use + or – to specify N/E or S/W. Marks can be
entered at OS position only when menu is displayed.
3. Press the [ENTER/SELECT] key.
4. Press the [1] key and key in mark to enter with the ten
keys.
5. Press the [ENTER/SELECT] key.
6. Press the [MARK] key to enter mark.
7. Repeat step 6 to continue entering the same mark with
the same entry method. To enter a different mark or
change mark entry method, repeat above procedure.
The map is automatically stored in the radar’s memory.
Example: How to draw a coastline by cursor
1. Press the [MENU] key and the [8] key twice to display
the MARK menu.
2. Press [1] [1] [7] (for coastline mark) and press the
[ENTER/SELECT] key.
3. Press the [4] key to select Cursor and press the
[ENTER/SELECT] key.
4. Press the [MENU] key.
5. Place the cursor mark on a required position and press
the [MARK] key.
6. Place the cursor at a next position and press the
[MARK] key. One line appears connecting designated
two points.
7. Repeat step 6 to establish the coastline.
01
03
05
07
09
11
13
15
16 Nav
Line
17 Coastline
18 Depth Contour
19 Prohibited Area
20 Cable
21 Erase
1.Mark Selection
02
04
06
08
10
12
14
2.Display
On Off
3.Erase
No
Erase Display
Erase All
4.Entry method
Cursor
L/L
OS Position
00°00.000'N
000°00.000'E
5.Posiiton Correction
Mark in use
0/3000