Caution, 1 connecting video equipment – Furuno MARINE RADAR 1823C User Manual
Page 68
4-4
4.2
Connection of Video equipment /
External Monitor/Remote Display
The above units can be connected to the MODEL1823C/1833C/1933C/1943C/1953C and
GD-1900C by using the hole at the rear of the display unit. Remove the cover to use this
hole. After connecting, cover the hole with soft putty to seal.
12:00
Video recorder, CCD camera etc.
VGA monitor
Remote display (ex. FMD-811)
CAUTION
Even though the display
unit meets waterproof
standard IPX-5,
this modification can
affect waterproofness.
Watertight integrity
cannot be guaranteed.
Connection of Video equipment/External monitor/remote display
4.2.1
Connecting video equipment
The display unit can show the picture from the CCD camera, video recorder etc. which
outputs composite signal in NTSC/PAL format, by using the optional NTSC/PAL interface kit.
Necessary parts
Name:
NTSC/PAL Interface kit
Type:
OP03-175
Code no.:
008-523-070
Table 4-2 NTSC/PAL Interface kit contents
Name Type
Code
No.
Qty
Remarks
PIP board
19P1004
008-521-890
1
NTSC/PAL
interface Board
Pan head screw
M3x6 C2700W
000-881-403
4
Connector assy
RCA-TMP-L230
000-144-615
1
Cable tie
SG-130
000-809-171
3
w/foot for fixing
Rubber grommet
MG-4
000-871-378
1