FujiFilm FinePix 40i - Manual (Page 19)

2
37 36
Switch off the camera and TV. Plug the A/V
cable (accessory) into the A/V OUT (audio-visual
output) socket on the camera. Plug the other end of the cable into the
audio/video input socket on the TV. Then switch
the camera and TV on and take pictures or play
back images as you would normally.
USING A TV MONITOR
● ! If you connect the A/V cable during playback, you
will not hear the sound from the TV.
● ! If you disconnect or reconnect the A/V cable while
the power is switched on, the sound may not be
output correctly.
●
! If there is a power outlet available, connect the
AC-3V AC Power Adapter.
●
! If your TV has stereo audio input sockets, plug the
cable into the left (white) socket.
●
! Refer to the instructions provided with your TV for
more information on audio and A/V input for your TV.
A/V OUT socket
Video (yellow)
Audio (white)
To terminals
2 1
ERASING SINGLE FRAME
4
Press “ d ” or “ c ” button to display the image to
be erased.
Press the “MENU/OK” button to erase the
displayed image. When erasing is complete, the
next image appears and the “
”
message is displayed.
E R A S E O K ?
● ! To cancel single-frame erase, press the “BACK”
button to return to the menu. To exit the menu
screen, press the “BACK” button again.
● ! If “ ” is displayed, the image
protection must be removed to erase the image
(
➡P.62).
● ! If the “ ” message is displayed, DPOF
is specified. When you press the “MENU/OK” button,
the image is erased and the DPOF settings are
updated.
D P O F S P E C I F I E D .
E R A S E O K ?
P R O T E C T E D F R A M E
3
To continue erasing images, repeat the
procedure from step
. 3