FujiFilm FinePix 40i - Manual (Page 21)

3
41 40
0
AUTO
This is the easiest mode for taking pictures and
can be used in a wide range of conditions.
✽This mode allows you to specify the Y (➡P.42)
and
b
( ➡P.43) settings.
0
MANUAL
Manual mode allows you to specify the best
combination of settings for your shot.
✽This mode allows you to specify the Y (➡P.42),
b
( ➡P.43),
G
( ➡P.45) and
A
( ➡P.46)
settings.
/
FILE SIZE/QUALITY
Use this mode to set the “FILE SIZE/QUALITY”
setting (
➡P.41).
2
SET-UP
This mode allows you to change the photography
settings (
➡P.88).
SELECTING THE MODE
PHOTOGRAPHY MODE
SETTING THE FILE SIZE AND QUALITY (COMPRESSION RATIO)
PHOTOGRAPHY MODE
Select
3
AUTO,
4
MANUAL,
/
FILE
SIZE/ QUALITY or 2 SET-UP mode.
● ➀ ● ➁ You can select any combination of 3 file size
settings and 3 quality (compression ratio)
settings according to the type of shot you want
to take.
To produce high-quality prints
Use the largest available file size with a low
compression ratio (FINE or NORMAL). However,
because this increases the amount of data in
each frame, the remaining number of available
frames is reduced.
For use on the Internet
These images are intended to be viewed on a
personal computer screen, so you should use a
small file size (640
× 480). Because this reduces
the amount of data in each frame, the remaining
number of available frames is increased.
Quality (compression ratio)
Choose [FINE] for better image quality or
[BASIC] to increase the number of available
prints.
In most cases, the [BASIC] setting provides
more than adequate image quality.
➀
Use “ a ( )” or “ b ( )” to change the file
size setting and “ d ” or “ c ” to change the
quality setting.
➁
Press the “MENU/OK” button to confirm the
setting.
● ! There are 6 combinations of file size and quality
settings in total (
➡P.26).
●
! Images can be resized after shooting ( ➡P.60).