FujiFilm FinePix 40i - Manual (Page 34)

4
67
[
DPOF DATE SETTING
PLAYBACK MENU
This function allows you to select whether or not
the date of shooting is included on the print.
➀
Set the Mode dial to “
1
”.
➁
Press the “MENU/OK” button to display the
menu on the LCD monitor.
➂
Press “ dc ” to select “ K DPOF”.
➀
Use “ b ( )” to select “
H
DATE”.
➁
Press “ d c ” to specify “DATE ON” or “DATE
OFF ”. This setting is then valid for all the
prints until the setting is changed.
●
! Before specifying any other settings, first specify
whether date is to be shown or not.
1 2
● ➀ ● ➁ ● ➀ ● ➁
● ➂
66
HOW TO SPECIFY PRINT OPTIONS
With the FinePix40i, you can order prints using the Digital Print Order Format (DPOF).
You can use the DPOF to specify the following:
● The frames to be printed and the number of prints for each frame
● Imprinting of the date and time
This section gives a detailed description of how to order your prints with the FinePix40i.
✽ Note that some printers do not support date and time imprinting or specification of the
number of prints.
✽ Note that the warnings shown below may be displayed while you are specifying the
prints.
( ➡P.103)
When you erase the image, the DPOF setting for that image are deleted at the same
time
( ➡P.103)
If you load a SmartMedia that contains frames specified for printing on another
camera, those print specifications are all reset and replaced by the new print
specifications.
( ➡P.103)
No more than 999 frames can be specified on the same SmartMedia.
D P O F S P E C I F I E D .
E R A S E O K ?