Setup mode using setup mode, Printout of factory defaults using list – FUJITSU DL9300 User Manual
Page 102
Advertising
Setup Mode
USING SETUP MODE
User's Manual
5-11
*1
FORMAT to DUPLEX are not printed when PARALEL OPTION is selected
for INTRFCE.
*2
PIN-18 is not printed when SERIAL option is selected for INTRFCE.
*3
TEAR-EN is printed when AUTO option is selected for TEAROFF.
Printout of factory defaults using LIST
(*3)
(*1)
(*2)
Advertising
This manual is related to the following products: