FUJITSU DL9300 - Manual (Page 178)

C-1
Command
Sets
User's Manual
COMMAND SETS
C
COMMAND SETS
This appendix describes printer commands and
their parameters.
This printer has three resident command sets:
• Fujitsu DPL24C PLUS (native command set for Fujitsu DL
series printers)
• IBM Proprinter XL24E
• Epson ESC/P2
Separate programmer’s manuals are available for these emulations.
See Appendix A for order information.
Select the same emulation on the printer and in your software. If your
software emulations include DPL24C PLUS, select DPL24C PLUS for
optimum performance.