Foster RBC20-60 - Manual (Page 6)

Information
Whilst in the program selection screen press and hold the dial for 2 seconds, the information
screen will be displayed. Rotate the dial until ‘INFORMATION’ is highlighted. Press and
release the dial to display the screen showing the last run cycle. The information relates to
date, program run, start time, start temperature and end temperature.
HACCP settings.
Whilst in the program selection screen press and hold the dial for 2 seconds, the information screen will be displayed.
Rotate the dial until ‘HACCP SETTINGS’ is highlighted. Press and release the dial to access the HACCP option screen.
Press and release the dial to move to the selection screen for long or short reports, rotate the dial to select which option,
once selected press and release the dial to confirm.
Press and release the dial to move to the selection screen for the print sample, select 3 or 5 minute selection rate.
On completion press and hold the dial for 2 seconds to return to the program selection screen.
Print Data.
Whilst in the program selection screen press and hold the dial for 2 seconds, the information screen will be displayed.
Rotate the dial until ‘PRINT DATA’ is highlighted. If using a hand held printer switch the printer on now. Point the printer at
the infra red download sensor (optional), located in display area, press and release the dial to download the print data.
On completion press and hold the dial for 2 seconds to return to the program selection screen.
Set time and date.
Whilst in the program selection screen press and hold the dial for 2 seconds, the information screen will be displayed,
below left. Rotate the dial until ‘SET TIME/DATE’ is highlighted. Press and release the dial to access the service screen,
below right. Press and release the dial to move to the displayed time in hours and minutes, rotate the dial to alter the time,
once the correct time has been achieved press and release the dial to move to ‘DAY’. If it is necessary to change the day,
month and year change the settings using the same procedure for setting the time.
On completion press and hold the dial for 2 seconds to return to the program selection screen.
Changing Text Language.
Whilst in the program selection screen press and hold the dial for 2 seconds, the
information screen will be displayed continue pressing the dial for a further 2 seconds to
display the ‘SERVICE MENU’. LANGUAGE will be highlighted, press and release the dial,
‘ENG’ (English) will be highlighted. Rotate the dial to change the language. Select the
preferred language, press and release the dial to confirm.
Screen Saver
The screen saver screen is displayed if the machine is not used for 20 minutes, providing power is connected to it. It
shows a series of ‘Z’ indicating sleep mode. Pressing and releasing the dial or opening the door will awaken the unit, the
program selection screen will be displayed.
Alarms and Warnings
Air Probe: If this alarm occurs it will remain in the program selected until it is completed, however no further
operation will be possible. Call your Foster Authorised Service Company.
Evap Probe: If this alarm occurs it will remain in the program selected until it is completed, however no further
operation will be possible. Call your Foster Authorised Service Company.
Food Probe: If this alarm occurs it will automatically change to a timed program until it is completed, however no
further operation will be possible. Call your Foster Authorised Service Company.
Door Open: The display will continue to show the alarm message until the door is closed. If this does not cancel the
alarm call your Foster Authorised Service Company.
5