FORD F-250 - Manual (Page 156)

• one wheel nut wrench. Slide over
square end of jack handle.
2. The following steps are required to move the support bracket (if
equipped) away from the spare tire:
• With tapered end of lug wrench,
loosen the eyebolt on the support
bracket.
• Line up the eyebolt with the slot
in the support bracket.
• Slide the support bracket off the
eyebolt and move the support
bracket away from the spare tire.
3. If equipped, unlock and remove the spare tire lock from the rear
bumper drive tube using the the spare tire lock key and the jack handle.
Roadside emergencies
156