FORD F-250 - Manual (Page 255)

Item Information
Required fuel Unleaded fuel only - 87 octane
Fuel tank capacity Refer to Refill capacities in the Capacities
and specifications chapter.
Engine oil (includes
filter change) 5.7L (6.0 quarts). Use Motorcraft SAE 5W-30
Super Premium Motor Oil, Ford specification
WSS-M2C153-G.
Tire size and pressure Refer to the Certification Label inside of
driver’s door
Hood release Pull handle under the left side of the
instrument panel.
Coolant capacity Refer to Refill capacities in the Capacities
and specifications chapter.
Power steering fluid
capacity Fill to line on reservoir. Use Motorcraft
MERCON
௡ ATF.
Manual transmission
(5-speed)
2
3.2L (3.4 quarts). Use Synthetic MERCON
௡
ATF. 3
Manual transmission
(6-speed)
2
5.5L (5.8 quarts). Use Motorcraft MERCON
௡
ATF. 3
Automatic
transmission fluid
capacity
2
16.7L (17.7 quarts). Use Motorcraft MERCON
௡
ATF. 4
1 Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. MERCON
௡ and MERCON௡ V are not interchangeable. DO NOT
mix MERCON
௡ and MERCON௡ V. Refer to your Scheduled Maintenance
Guide to determine the correct service interval.
2 Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. Check the container to verify the fluid being added is of the
correct type. Refer to your Scheduled Maintenance Guide to determine
the correct service interval.
Some transmission fluids may be labeled as dual usage, such as
MERCON
௡ and MERCON௡ V. These dual usage fluids are not to be used
in an automatic transmission that requires use of the MERCON
௡ type
Filling station information
255