Starting your lifebook notebook, Power on – Fujitsu Siemens Computers N6470 User Manual
Page 47
42 - Starting Your LifeBook Notebook
Starting Your LifeBook Notebook
Power On
Power/Suspend/Resume Button
The Power and Suspend/Resume button is used to power on your LifeBook notebook, to resume from
Sleep or Save-to-Disk mode or to place your notebook in Sleep or Save-to-Disk mode. (You can also use
the button to power down the system by holding it down for approximately five seconds. This can be useful
if the system is “hung up”. This shouldn’t be used as the normal means of shutdown, however.) You can
also turn off your notebook by clicking on the small arrow at the bottom right of the Windows Start menu,
then clicking Shut Down..
W
HEN
YOU
TURN
ON
YOUR
L
IFE
B
OOK
NOTEBOOK
,
BE
SURE
YOU
HAVE
A
POWER
SOURCE
. T
HIS
MEANS
THAT
A
BATTERY
IS
INSTALLED
AND
CHARGED
,
OR
THAT
THE
AC
OR
A
UTO
/A
IRLINE
ADAPTER
IS
CONNECTED
AND
HAS
POWER
.
Once you have connected your
AC adapter or charged the
internal Lithium ion Battery, you
can press this button to power up
your notebook. (Figure 20)
Figure 20. Powering Up the System
Power/Suspend/
Resume Button