Fujitsu Siemens Computers N6470 - Manual (Page 57)

52 - Power Management
Power Off
Before turning off the power, check that the hard drive/optical drive access indicator is off. If you turn off
the power while accessing a disk there is a risk of data loss. To ensure that your notebook shuts down
without error, use the Windows shut down procedure.
Using the correct procedure to shut down from Windows allows your notebook to complete its operations
and turn off power in the proper sequence to avoid errors. The proper sequence is:
1 Click the Start button, and then move the mouse over the small arrow at the bottom right of the window.
2 Select Shut Down from the list.
If you are going to store your notebook for a month or more see the Care and Maintenance Section.
• A LWAYS POWER OFF THE COMPUTER BEFORE TRANSPORTING AND / OR PACKAGING IT . A FTER SHUTTING DOWN
THE SYSTEM , WAIT UNTIL THE STATUS LED PANEL INDICATES POWER OFF CONDITION ( I . E ., NO LIGHTS ARE
ILLUMINATED ).
• I T IS POSSIBLE THAT THE UNIT MAY NOT AUTOMATICALLY GO TO POWER OFF OR HIBERNATE MODE WHEN YOU
CLOSE THE LID . T HIS SITUATION MAY OCCUR DUE TO PRE -OS BOOT PASSWORD SECURITY SETTINGS OR SOME
OTHER APPLICATION RUNNING ON THE COMPUTER .
• A TTEMPTING TO TRANSPORT THE COMPUTER WHILE POWER IS ON MAY DAMAGE THE NOTEBOOK DUE TO SHOCK
OR OVERHEATING SINCE THE AIR VENTS MAY BE BLOCKED OR RESTRICTED .
B E SURE TO CLOSE ALL FILES , EXIT ALL APPLICATIONS , AND SHUT DOWN YOUR OPERATING SYSTEM
PRIOR TO TURNING OFF THE POWER . I F FILES ARE OPEN WHEN YOU TURN THE POWER OFF , YOU WILL
LOSE ANY CHANGES THAT HAVE NOT BEEN SAVED , AND MAY CAUSE DISK ERRORS .