Important safety instructions – Fender B-DEC 30 User Manual

Page 2

Advertising
background image

B-DEC 3O



f e n d e r . c o m

• This symbol warns the user of dangerous voltage

levels localized within the enclosure of the unit.

• This symbol advises the user to read all

accompanying literature for safe operation of the

unit.

• Read, retain, and follow all instructions. Heed all warnings.

• Only connect the electric line cord to an earth grounded AC

receptacle in accordance with the voltage and frequency

ratings listed under INPUT POWER on the rear panel of this

product.

WARNING:To prevent damage, fire or shock hazard, do not

expose this unit to rain or moisture.

• Unplug the AC power line cord before cleaning the unit

exterior (use a damp cloth only). Wait until the unit is

completely dry before reconnecting it to power.

• Maintain at least 6 inches of unobstructed air space behind

the unit to allow for proper ventilation and cooling of the

unit.

• This product should be located away from heat sources such

as radiators, heat registers, or other products that produce

heat.

• This product may be equipped with a polarized plug (one

blade wider than the other). This is a safety feature. If you

are unable to insert the plug into the outlet, contact an

electrician to replace your obsolete outlet. Do not defeat the

safety purpose of this plug.

• Protect the power cord from being pinched or abraded.

• This product should be serviced by qualified service personnel

when: the power supply cord or the plug has been damaged;

or objects have fallen, or liquid has been spilled onto the

product; or the product has been exposed to rain; or the

product does not appear to operate normally or exhibits a

marked change in performance; or the product has been

dropped, or the enclosure damaged.

• Only use a cart or stand with this product that is recommended

by this product’s manufacturer.

• The power supply cord of this product should be unplugged

from the outlet when left unused for a long period of time, or

during electrical storms.

• Do not drip nor splash liquids, nor place liquid filled containers

on the unit.

CAUTION:No user serviceable parts inside, refer servicing to

qualified personnel only.

• Fender® amplifiers and loudspeaker systems are capable of

producing very high sound pressure levels which may cause

temporary or permanent hearing damage. Use care when

setting and adjusting volume levels during use.

FCCCOMPLIANCENOTICE

This equipment has been tested and found to comply

within the limits for a Class B digital device, pursuant

to Part 15 of the FCC rules. These limits are designed

to provide a reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy

and if not used in accordance with the instructions, may

cause harmful interference to radio communications and

there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause

harmful interference to radio or television reception, which

can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by

one or more of the following measures: reorient or relocate

the receiving antenna, increase the separation between

the equipment and receiver, connect the equipment into

an outlet on a circuit different from that of the receiver.

Consult the dealer or an experienced radio/TV technician

if help is needed.

A PRODUCT OF:

FENDER MUSICAL INSTRUMENTS CORPORATION

CORONA, CALIFORNIA USA

Trademarks:

Fender®, B–DEC™, FBA™, Bassman® are trademarks of FMIC.

Other trademarks are property of their respective owners.

Copyright © 2006 FMIC. All rights reserved.

P/N 683ICT011 Rev ?

Important Safety Instructions

Advertising