Lesson 3: powertrain – FORD FCSD TECHNICAL TRAINING FCS-14000-DL User Manual
Page 59
Advertising
LESSON 3: POWERTRAIN
Set Crankshaft Damper Notch to 1 o’clock Position
Set the crankshaft keyway to 12 o’clock. The machined notch on the back face of the damper pulley should
appear at about the 1 o’clock position.
NOTE: The number one piston should have just passed TDC when the crank was turned the normal rotational
direction of engine operation.
2005 Expedition/Navigator New Model Technician Training
02-SEP-04
3-23
Advertising