FORD FCSD TECHNICAL TRAINING FCS-14000-DL - Manual (Page 64)

LESSON 3: POWERTRAIN
Set Crankshaft Damper Spoke to 6 o’clock Position
Rotate the marked damper spoke clockwise to the 6 o’clock position.
CAUTION: It is imperative that the engine is only rotated to the 6 o’clock position in a clockwise
rotation.
NOTE: The only time the engine is turned counter-clockwise back to the 12 o’clock keyway position is during
the re-assembly procedure.
2005 Expedition/Navigator New Model Technician Training 02-SEP-04 3-28