FOCUS Enhancements Bridge/Router MX-4DV User Manual
Page 117
W
ORKING
WITH
A
UDIO
U
SING
H
EADPHONES
113
U
SING
H
EADPHONES
You might find headphones helpful for monitoring audio input signals. You can plug a set of head-
phones directly into the MX-4 DV by connecting them to the headphone jack located on the rear
panel of the unit. Headphone audio is stereo.
Normally, headphones carry only the main sound, that is, the sound coming from the CURRENT
input source. You can, however, monitor the sound from the NEXT source without disturbing the
audio going to the output device.
To monitor the audio on the NEXT source:
•
Press
SHIFT
+
AUDIO
/
VIDEO
.
Each time you press
SHIFT
+
AUDIO
/
VIDEO
, you toggle between the audio on the CURRENT source
and that on the NEXT source.
A
DVANCED
A
UDIO
S
TEPS
If you have an external audio mixer device available, FOCUS Enhancements recommends you use
that device to manually control all sound. you can:
•
Connect the external mixer’s output to any MX-4 DV audio input, and permanently set that
source as your sound input source. This lets you use the external mixer when you need flexi-
bility, or use the MX-4 DV when you want control of the audio. The latter gives you the ability
to perform more activities, like fading audio automatically when video transitions run.
•
Meter line out, which is not necessarily the source you’re working on. For example, suppose
the Program out is on Source A, but your adjusting the gain for Source B. You won’t see that
reflected in the LED meter (if Source B was on the program out you would). The line out
slider should affect the meter.
U
SING
THE
A
NALOG
A
UDIO
A
DJUSTMENTS
F
UNCTION
Use the Audio Adjustments Function to adjust the analog audio input levels and add delay to the
analog or DV audio path. These are advanced functions and most users should leave the system set
to its default settings: 0dB gain and 2.25 fields of delay. Use these functions if you need fine con-
trol over your audio inputs or to compensate for video delays that may have occurred in other
devices in your video stream.