FOCUS Enhancements Bridge/Router MX-4DV User Manual
Page 132
MX-4 DV U
SER
G
UIDE
C
HAPTER
13
128
To set up your Macintosh computer to communicate with the MX-4 DV (Static IP address):
Macintosh OS 10.2.8/OS 10.3.6
1
Plug in the included crossover cable to the MX-4 DV Ethernet port and your computer’s
Ethernet port.
NOTE
A straight cable will have the same wire configuration colors on each end.
A crossover cable will have two different wire configuration colors on each end.
Make sure to use a crossover cable if you are working with a Macintosh computer.
2
Access System Preferences on the desktop using the Apple Logo in the right-hand corner of
the screen.
3
Click the Network icon in System Preferences to access the Network page.
4
In the Network page, change the Configure IPv4 field to Manually.
The network page should show an IP address of 0.0.0.0.
5
Apply a universal static IP address (192.168.1.4) to allow communication with the mixer
(192.168.1.3).
For example, if the mixer displays 192.168.1.3, the IP address entered on the Macintosh
should be 192.168.1.4.
6
Access your Internet browser. It should display the following: