Furuno FAX-30 - Manual (Page 21)

1. OVERVIEW, SETUP
1-7
MENU
CHANNEL SETUP
EDIT STATION LIST
<< Top
SYSTEM SETUP
RX MODE
Received facsimile image
thumbnails appear here.
Top menu
Facsimile image data
(Changes with picture
received.)
Click to return
to top display
Fax standby display
TIMER SETUP
MENU
<< Top
EDIT STATION LIST
SYSTEM SETUP
RX MODE
RX SETUP
Navtex standby display
Navtex message list
appears here.
518kHz
AUTO LAT/LON OK
SS=10
STBY
Top menu
Navtex message data
(Changes with message
received.)
Click to return
to top display
Navtex message
display area
100N 3625.kHz
IOCXX10 XXXrpm
SS=XXX SN=XX
STBY
Standby displays
After you are in a standby display time data is transferred from the PC to the
FAX-30.
Note 1:
After turning on the FAX-30 be sure to access it f rom the PC. Then,
even if the PC is turned off, time data is stored in the FAX-30, for use
with timer recording.
Note 2: The example screens shown in this manual may not match the screens
you see. The screen you see depends on your equipment settings and
system configuration.