Furuno FAX-30 - Manual (Page 26)

2. FAX OPERATION: NAVNET
2-4
2.1.2 Previewing image being received
To preview an image while it is being received, do the following:
1. At the fax standby display, press the WX FAX soft key.
2. Press the RCV WX FAX soft key.
RECEIVE
WX FAX
Zone/Station/Channel
Frequency
IOC (288 or 576)
Speed (60, 90, 120, 180, 240)
Signal Strength (Range: 0-99, Typical: 30-70)
Signal-to-Noise Ratio (Range: 0-99, Typical: 20-60)
Image being
received
100N JMH 3622.5kHz IOC288 180rpm SS=57 SN=31 RCV
CH
SETUP
TIMER
SETUP
STOP
RX
RETURN
START
RX
Receiving facsimile image
Facsimile receiving display
2.1.3 Stopping automatic receiving
You can stop automatic receiving at any time by doing the following:
1. At the standby display, press the WX FAX soft key.
2. Press the RCV WX FAX soft key.
3. Press the STOP RX soft key. The indication “RCV” is replaced with “STBY.”
4. Press the RETURN soft key.