Furuno FAX-30 - Manual (Page 86)

7. INSTALLATION
7-4
7.3 Wiring
Four cables are connected to the facsimile receiver: antenna cable, Net Cable
(or PC cable), power cable, ground wire. Connect them as shown in the figure
below. For detailed information, see the interconnection diagram on page S-1.
ANT (IV-2sp)
Ground
Ground Wire*
NavNet series display unit, Hub or PC
Net Cable: MJ-A6SPF0014-050, 5 m**
PC Cable: MJ-A6SPF/TM11AP8C050
** Optional cable 1 m, 10 m,
20 m or 30 m is available.
Whip Antenna*
2.6 m Whip Antenna
(option)
FAX-5
Preamp
(option)
Antenna
Swtich*
Antenna Feeder*
Connect core only.
External Conductor
Vinyl Tape
* = Local Supply
White (+)
Black (-)
Shield
Power Cable
MJ-A3SPF0024-035
12-24 VDC NETWORK
Optional cable 10, 20, 30,
40 or 50 m is available.
Coaxial
Cable*
Wiring