Furuno FAX-30 - Manual (Page 67)

5. NAVTEX OPERATION: PC
5-3
4. Click desired stations in STATION ID SELECTION. Check mark indicates
item is selected. (If you need help with station selection, click 490 kHz
STATION LIST or 518 kHz STATION LIST for details.)
5. Check desired messages in MESSAGE ID SELECTION. Check mark
indicates item is selected. (If you need help with message selection, click
MESSAGE LIST for details.)
6. At MAX. ERROR RATE, enter the maximum allowable error rate to use. The
setting range is 0-33 (%). Any message with an error rate higher than entered
here will be rejected.
7. Click OK and then click “<back” or Back button to return to the top menu.
5.3 Displaying Navtex Messages
At the navtex standby display, click the desired message number at the top of
the display.
MENU
<< Top
1A55 06/05 03:57 518kHz ERROR RATE=0.0%
ZCZC IA55
160520 UTC JUNE 05
JAPAN NAVTEX N.W. NR 0775/2002
ASHIKURI MISAKI, SOUTHWARD.
FLARE DROPPING. 150930Z TO 151100Z JUNE,
ALTERNATE 160930Z TO 161100Z JUNE.
WITHIN 10 MILES OF 31-00N 133-00E.
GEODETIC DATUM UNKNOWN.
NNNN
Received messages (click to display)
Text of message
EDIT STATION LIST
SYSTEM SETUP
RX MODE
RX SETUP
1. 1A55 06/22 00:26 518kHz ERROR RATE=0.0%
2. 1A55 06/20 01:22 518kHz ERROR RATE=0.0%
3. 1A55 06/18 15:31 518kHz ERROR RATE=0.0%
4. 1A55 06/17 07:11 518kHz ERROR RATE=0.0%
5. 1A55 06/15 03:44 518kHz ERROR RATE=0.0%
NEXT PAGE 1/2
PREV NEXT
Use scroll bar
to scroll list.
518kHz
AUTO LAT/LON OK
SS=10
STBY
Navtex message data
IA55:
Station ID (I), Category (A),
Message No. (55)
06/05: Date received
03:57: Time received
518kHz: Frequency
Error rate
Navtex standby display