Fujioh BUF-03R - Manual (Page 10)

10
INSTALLATION (continued)
3 Disconnect the wire connector between the push switch assembly and wire box,
then detach the front cover by disengaging its hinge part.
NOTE
Be careful not to damage the hinge part.
4 Align 4 screw holes of the liner and range hood unit, then fix securely using the
supplied screws
(M5
×30) and nuts.
NOTE
Fasten all screws and nuts evenly.
5
Make the duct joint secure and air tight
using non-flammable tape such as duct
tape, etc. (not supplied)
NOTE
Make sure that the shutter installed
in the exhaust pipe moves freely.
1
2