Installation (continued) – Fujioh BUF-03R User Manual

Page 13

Advertising
background image

13

4. FINAL ASSEMBLY AND CHECK

One 40 W light bulb (not supplied) can be mounted to this range hood.
Prior to final assembly, install a light bulb (ordinary type, in the base diameter
17 mm), rated 120 V-40 W or below.

1

Assembly

(1) Hang the front cover on the hinge part.
(2) Connect the wire connector and replace

the front cover with 4 screws.

CAUTION

To prevent the screw holes from being damaged, be sure to tighten the screws
with the torque of 13 inch-lbs. (1.5 N-m) or less.

Be sure to connect the wire connector rightly. Otherwise, the range hood won’t
work properly.

2

Check

(1) Turn on the electrical circuit to the range hood.
(2) Make sure that the switch and light operate correctly. Refer to page 4 of the

Operation Manual.

(3) Check the ventilating functions at Hi, Me and Lo positions.
(4) Make sure that the range hood has no abnormal noises and/or vibration.

INSTALLATION (continued)

CAUTION

To reduce the risk of injury, keep your hands and other objects away from the fan
while it is in motion.

Wear working gloves to avoid injury.

Advertising