Fujioh BUF-03R - Manual (Page 11)

11
3. CONNECTING POWER SUPPLY WIRES
WARNING
• Electrical wiring should be done by a qualified person(s) in accordance with all-
applicable codes and standards, including fire-rated construction. An unqualified
person doing the work could result in fire, electric shock or injury.
• This range hood uses 120V AC. Do not connect to other voltage since fire, electric
shock or damage could result.
1 Remove the nut from the conduit connector at
the end of power wiring.
WARNING
Be sure to switch power OFF at service panel
before wiring.
2 Remove one screw fixing the wire cover and
detach it.
3 Connect the conduit through the connecting hole
of the body using the nut previously removed.
INSTALLATION (continued)