Frye FONIX FP40D - Manual (Page 135)

Specifications 127
Auto Shutdown General shutdown after no operation of controls for 15 minutes
(battery operation only).
Battery Charger Built-in automatic battery charger. Full charge in 10 hours.
DISPLAY SCREEN
Backlit Liquid Crystal Display Graphical display, 640 pixels wide x 200 pixels high.
Color Blue background with white lettering or white background with
blue lettering.
Illumination Fluorescent edge lighted.
Display Angle Module tilts from 12 to 90 degrees with respect to horizontal.
PRINTER
Type High speed, thermal.
Print Speed Screen copy in 14-19 seconds.
Paper Used Black print on white background. Print density adjustable
in software (FP40 only).
Paper Width 60 mm.
Access Through top mounted door.
Other: Unit also works with HPCL and EPSON or compatible printers
through a serial port.
SOUND CHAMBER
Test Area 3” x 3” (7,5 x 7,5 cm) in acoustical foam-treated area. Separate
space for excess microphone cord storage.
Loudspeaker 3” cone, mounted in case. Case mounts on a swivel arm for
probe operation.
EXTERNAL CONTROLS, INDICATORS AND CONNECTORS
Front Panel Buttons 9 function keys plus Print, Feed, Data/Graph, Level, Reset,
Start/Stop, and Operate On/Off (with guard ring).
Rotary Controls Front: Amplitude, Frequency; Rear: Probe monitor level.
A/C Power Switch Rocker type, rear mounted.
Jacks RS232 (9-pin), probe monitor earphone (1/4” stereo), external
speaker jack (3mm phone jack), and VGA (15-pin).