Foundry Networks AR1202 - Manual (Page 13)

June 2004 © 2004 Foundry Networks, Inc. 2 - 1
Chapter 2
Product Introduction
This chapter provides information about the Foundry AR1202 and AR1204 router front and back panels, LEDs,
cable connection ports, and panel components.
Overview
This section describes front- and back-panel components of the Foundry AR1202 and AR1204 router. Additional
information is also provided in following sections about external cables, wiring, and connection points.
The Foundry AR1202 and AR1204 is designed to provide WAN to LAN networking connectivity for branch office
communication and primary Internet access for medium-size businesses. The AR1202 and AR1204 is a T1/E1
router providing two WAN ports, two 10/100 Fast Ethernet ports, an AUX port, and a local/remote management
Console port. The base system ships with one active WAN port (WAN 1) and one active Ethernet port (FE 0).
Software licence keys may be purchased to activate one additional WAN and/or one Ethernet port. Contact
Foundry sales for more information.
AR1202
AR1202 Front Panel
The router front panel houses the system LEDs.
Figure 2.1 AR1202 Router Front Panel
AR1202 Back Panel
The AR1202 router back panel provides connections for two WAN ports, two 10/100 Base-T Ethernet ports, one
AUX port, one Console port, and a 12 VDC power input jack.
WAN Port
LEDs 1-2
Ethernet 0 LEDs Ethernet 1 LEDs
Power LED LINK/ACT HS DUP LINK/ACT HS DUP