Foundry Networks AR1202 - Manual (Page 29)

June 2004 © 2004 Foundry Networks, Inc. 4 - 1
Chapter 4
Configuration
This chapter describes how to login; change the default password, configure the router and users, and change the
factory default configuration. The boot process and software upgrade process is also discussed in detail.
Logging In
If you have not established a local console connection, see “Operator Interface” on page 3-9 for more information.
The following figure shows the login sequence and the initial prompt after login is complete.
Figure 4.1 Initial CLI Prompt
NOTE: The default host name is Foundry-model number, e.g., Foundry-AR1202#.
Command Tips
Use the following command tips and shortcuts with command line interface commands.
• To display all commands, type tree.
• To access help associated with a command, type help <command name>. You may also use the ? key after
any command.
• To exit back one level in the command hierarchy, type exit and press Return.
• To exit the command mode and/or return to the base CLI prompt, press the key combination Ctrl-Z.
• Type the first two letters of a command, and then press the Tab key to automatically spell out the command.
• Scroll through the available commands using the Tab key.
Initial CLI Prompt
login: username
password:
username logged in on Fri May 7 05:28:01 2004
from console
Foundry CLI
foundry-model#