Furuno IF-NMEASC - Manual (Page 14)

3. ADJUSTMENTS
6
7. Push the [Menu/Cancel] button to light the Bps LED on the Port 2 line.
8. Push the [Enter] button. The Bps LED starts flashing and the current bps setting appears.
9. Push the [+] or [-] button to select desired baud rate. The choices are 4800, 9600, 19200 and
38400 (bps).
10. Push the [Enter] button. The bps LED stops flashing.
11. Push the [Menu/Cancel] button to light the Output interval LED on the Port 2 line.
12. Push the [Enter] button. The Output Interval LED starts flashing and the current output interval
setting appears.
OUTPUT PROCESSING
0 0 0 3
Heading Pitch
Sentence
Roll
Bps
Output
Interval
Bps Sentence
Offset
Output
Interval
Bps
LED
- +
Enter
Menu/
Cancel
Port 2
Port 3
OUTPUT PROCESSING
0 0 0 3
Heading Pitch
Sentence
Roll
Bps
Output
Interval
Bps Sentence
Offset
Output
Interval
Current bps setting
(example: 4800 bps)
Other indications:
960: 9600
bps
1920: 19200 bps
3840: 38400 bps
- + Enter
Menu/
Cancel
Port 2
Port 3
OUTPUT PROCESSING
- + Enter
Menu/
Cancel
0 0 0
Heading Pitch
Sentence
Roll
Bps
Output
Interval
Bps Sentence
Offset
Output
Interval
Current output interval setting (Port 2)
25: 25
ms
100: 100 ms
200: 200 ms
1000: 1000 ms
2000: 2000 ms
Port 2
Port 3