FUJITSU fi-5000N - Manual (Page 16)

8
Installation of the FUJITSU TWAIN 32 scanner driver
is completed.
■ Installing ScandAll 21
"Scandall 21" is an image capturing software that com-
plies with the TWAIN standard. The FUJITSU TWAIN
32 scanner driver enables you to capture images with a
FUJITSU image scanner fi-series.
1. Insert the Setup CD-ROM into the CD drive.
⇒
<SETUP DISK START UP SCREEN> appears.
2. Click [INSTALL PRODUCTS].
3. Click [ScandAll 21] on the window below.
4. Select a language used for installation on
[Choose Setup Language] window and click
[OK].
5. Install the application following the instructions
on the window.
6. When the [InstallShield Wizard Complete] win-
dow appears, click [Finish].
ATTENTION
In order to use the scanner, it is also
necessary to have a scanning appli-
cation that complies with the TWAIN
standard.
To perform the scanning test in sec-
tion "2.7 Scan Test", install the Scan-
dAll 21 scanning application provided
with the fi-5000N.
If ScandAll 21 is already installed in
the PC, uninstalled it before installing
the ScandAll 21provided with the fi-
5000N.
To install ScandAll 21, select "Scan-
dAll 21" at step 4.
ATTENTION
When using Windows 2000 or
Windows XP, log on as a user with
"Administrator" rights.
ATTENTION
For finishing the installation, it may be
necessary to restart your computer.
Follow the instructions on the window.