FUJITSU fi-5000N - Manual (Page 17)

fi-5000N Getting Started
9
For FUJITSU ISIS Scanner Driver
■ Preparation
Prepare the Setup CD-ROM.
■ Installing the FUJITSU ISIS
Scanner Driver
1. Turn on the power of the PC, and log on to Win-
dows.
2. Insert the "Setup CD-ROM" into the CD drive.
⇒
<SETUP DISK START UP SCREEN> appears.
3. Click [INSTALL PRODUCTS].
4. Click [ISIS Driver] on the window below.
5. Select a language used for installation on
[Choose Setup Language] window and click
[OK].
6. Follow the instructions on the window to install
the software.
7. When the [InstallShield Wizard Complete] win-
dow appears, click [Finish].
Your PC will be restarted. Do not remove the Setup CD-
ROM until your PC has completely restarted.
Now the installation of the FUJITSU ISIS scanner driver
is completed.
HINT
Windows XP screenshots are used in
this section as examples. The
windows and operations may slightly
vary depending on your OS.
ATTENTION
When using Windows 2000 or
Windows XP, log on as a user with
"Administrator" rights.
ATTENTION
This screen may not appear when the
"Autoplay" setting of your PC is OFF.
In this case, run "Install.exe" in this
CD-ROM directly from the "Explorer"
or "My Computer".
HINT
In order to use the scanner, it is also
necessary to have an application that
complies with the ISIS standard. You
can install "QuickScan Pro" bundled
with the scanner.