Fluke NetDAQ 2645A - Manual (Page 318)

2640A/2645A NetDAQ
Users Manual
J-20
Invalid Minimum Value for Scaled Range!
You have entered an invalid Minimum Value for the Mx+B Input Range
calculation.
Enter a Minimum Value that is less than +9.9999E+9.
Invalid Minimum Value for Input Range!
You have entered an invalid Minimum Value for the Mx+B Input Range
calculation.
Enter a Minimum Value that is less than +9.9999E+9.
Invalid Offset (B) Value!
You have entered an Offset (B) value for Mx+B scaling that is excessively large.
Select a B value that is less than +9.9999E+9.
Invalid Plot Maximum Value!
You have entered a Plot Maximum value that is excessively large.
Select a Plot Maximum value that is less than +9.9999E+9.
Invalid Plot Minimum Value!
You have entered a Plot Minimum value that is excessively large.
Select a Plot Minimum value that is less than +9.9999E+9.
Invalid Value!
You entered a value in a format that cannot be read by NetDAQ Logger.
Re-enter the value according to the instructions for the dialog box, which are
available within Online Help (use the Search feature in the Help menu).
IP Address segments must range from 0 to 255!
You tried to enter an IP address segment that is over 255.
An IP address is 32 bits divided into four octets (8 bits), with each octet expressed
in dotted-decimal format. For example, 198.187.246.101. The maximum decimal
number expressed by 8 bits is 255, therefore, the largest possible IP address
segment is 255.