Fluke NetDAQ 2645A - Manual (Page 150)

2640A/2645A NetDAQ
Users Manual
5-4
Note
If this is the first use of the Trend Link data file, allow a few seconds
for Trend Link to create the folder and files used for the chart.
4. To change the look of the chart, see "Getting the Right Look for your Trend
Link Chart" later in this chapter.
5. Click the Stop Instrument button on the toolbar when you wish to terminate
scanning operations.
6. To save changes to the chart, select File | Save in Trend Link. By saving the
chart, you can play it back at a later time with the same settings.
7. Close Trend Link by selecting File | Exit.
Playing Back a Trend Link File in Trend Link 5-3.
Complete the following procedure to play back a NetDAQ Trend Link data file
using Trend Link.
1. Open Trend Link from Start | Programs or select Plot/Trend | Show Trend
Link in NetDAQ Logger. The figure below shows a typical Trend Link
opening screen.
ds122s.bmp
2. Select File | Open to display the Chart Open dialog box.