Fluke NetDAQ 2645A - Manual (Page 163)

Using Trend Link for Fluke
Getting the Right Look for Your Trend Link Chart
5
5-17
ds133s.bmp
Configuring the Curve Status Display 5-20.
Complete the following procedure to select the elements of the Curve Status
display. The Curve Status display is the window at the bottom of the chart
containing the parameter information of the curves. Toggle Curve Status on and
off with the Curve Status Window button on the Control Bar. (See "Using the
Trend Link Control Bar.")
1. Select Edit | Curve Status Info to open the Curve Status Information dialog
box (below).