Fluke NetDAQ 2645A - Manual (Page 167)

Using Trend Link for Fluke
Getting the Right Look for Your Trend Link Chart
5
5-21
the left side of the curve window will include a display of scale values.
Otherwise, a band without numbers will appear.
Curve Type Select the type of curve: normal, highlight, shaded, or SPC
(Statistical Processing Control). If you enabled the NetDAQ Logger channel
alarm values, the default curve type is "highlighted" and Trend Link sets limit
values according to the alarm values.
Precision refers to the number of digits appearing to the right of the decimal
point (Curve Status window and Band Bars. For example, a Precision entry of
1 would show values of 70.0 and 80.0 (maximum entry is 7, showing values
of 70.0000000 and 80.0000000.)
Color Click here to select the color of the curve trace.
More Button Click to open the Curve Options dialog box for the Curve Type
selected.
Minimized Button Click to select display options when the dialog is
minimized. A minimized dialog becomes a floating window displaying
various types of information about the curve (tag name, last data value, etc.)
AutoScale Button Click to autoscale the scale values based on the current
data in view in the curve window.
Draw First Button This causes the curve to be drawn on the top over all
other curves.
Draw Last Button This cause the curve to be drawn on the bottom under all
other curves.
Statistics Button Opens the display for the statistics of the curve, including
Histogram, Box Plot, Sum, Mean, and Standard Deviation values.
4. After making your selections in the dialog box, click OK or minimize the
dialog.
Background Preferences 5-22.
Complete the following procedure to select the background preferences.
Background preferences select the curve background color and grid appearance.
1. Select the Preferences | Background to open the Background Preferences
dialog box (below).