Fluke NetDAQ 2645A - Manual (Page 5)

SAFETY TERMS IN THIS MANUAL
This instrument has been designed and tested in accordance with IEC publication
1010-1,
Safety Requirements for Electrical Measuring, Control and Laboratory
Equipment. This Users Manual contains information, warnings and cautions. Use
of this equipment in a manner not specified herein may impair the protection
provided by the equipment.
This instrument is designed for IEC 1010-1 Installation Category II use.
WARNING statements identify conditions or practices that could result in personal
injury or loss of life.
CAUTION statements identify conditions or practices that could result in damage
to equipment.
SYMBOLS MARKED ON EQUIPMENT:
WARNING Risk of electric shock.
Ground (earth) terminal.
Protective ground (earth) terminal. Must be connected to safety earth
ground when the power cord is used.
Attention. Refer to the manual (see the Index for references). This
symbol indicates that information about usage of a feature is contained
in the manual. This symbol appears on the Universal Input Module and
in the following three places on the instrument rear panel:
1. Ground Binding Post (to the left of the line power connector).
2. Ground Binding Post (to the left of the 10Base2 connector).
3. ALARM/TRIGGER I/O and DIGITAL I/O connectors.
AC POWER SOURCE
The instrument is intended to operate from an ac power source that will not apply
more than 264V ac rms between the supply conductors or between either supply
conductor and ground. A protective ground connection by way of the grounding
conductor in the power cord is required for safe operation.