Installing trend link for fluke (optional), Testing and troubleshooting, Testing the installation – Fluke NetDAQ 2645A User Manual
Page 87: Testing and troubleshooting 2-49
Preparing for Operation
Testing and Troubleshooting
2
2-55
“Installing Host Computer Networking Software” and “Setting Host
Computer Networking Parameters” to configure the host computer for general
network operation.
Installing Trend Link for Fluke (Optional)
2-48.
The Trend Link setup program automatically determines whether to install the
32-bit (for Windows 95 and Windows NT) or 16-bit version of the software. To
install Trend Link, complete the following procedure:
1.
Insert Disk 1 and run the setup application (setup.exe).
2.
After clicking Next to get to the second dialog box, select the language of the
User Interface. Click Next.
3.
Uncheck components you do not want to install. Use Browse if you want to
change the destination directory.
4.
Click Disk Space if you want to find a disk with more space. Choosing
another disk will change the destination disk. Click Next.
5.
Select or type a name if you want to change the Program Folder name. Click
Next.
6.
Check the installation parameters. If they are correct, click Next to begin file
transfer. If you want to change the parameters, click Back to go to the
appropriate screen and make the change. Then click Next until the file transfer
begins.
If you installed Trend Link in a destination directory other than the default,
complete the following procedure in NetDAQ Logger to locate Trend Link:
1.
Open the NetDAQ Logger application and select Plot/Trend | Trend Link-
Directory.
2.
Enter the directory location where you installed Trend Link.
Testing and Troubleshooting
2-49.
Use the following testing procedure to check the operation of the NetDAQ
system. Troubleshooting suggestions provide help to identify problems. See
Appendix I for additional information.
Testing the Installation
2-50.
This test procedure includes opening NetDAQ Logger, configuring and verifying
communications with the instrument, and opening Trend Link.
This procedure assumes that you have performed the following relevant steps
described earlier in this chapter: