Bios recovery - recovering system bios – FUJITSU Mainboard D1931 User Manual
Page 38
BIOS Recovery - Recovering System BIOS
28 - English
A26361-D1931-Z120-1-7419, Edition 1
BIOS Recovery - Recovering System BIOS
i
All BIOS settings are reset to the default values.
►
Open the casing as described in the operating manual.
►
Set the switch for "Restore system BIOS" to ON.
►
Close the casing as described in the operating manual.
►
Insert a BIOS update floppy disk and start the PC.
►
Note the signals issued from the loudspeaker. You have successfully restored the BIOS if you
hear the signal sequence "short-short- long- long- long" and the diskette access indicator is
dark. This can take a few minutes.
►
Open the casing as described in the operating manual.
►
Set the switch for "Restore system BIOS" to OFF.
►
Close the casing as described in the operating manual.
►
Remove the floppy disk from the drive.
►
Start the PC and invoke BIOS Setup.
►
Select the menu item Reset Configuration in the menu Advanced and change the setting to Yes.
►
Save the change and terminate BIOS Setup.
The BIOS recovery has now been completed. The system restarts.
i
Detailed information on the BIOS recovery is contained in the manual "BIOS Setup"
("Drivers & Utilities" CD).