Friedrich CP18C30 User Manual

Page 13

Advertising
background image

13

13

To operate air conditioner with remote control

NOTE: Remote control may vary in appearance.

NOTE: Two AAA batteries (included) power the remote control.

Replace batteries after 6 months of use, or when the remote

control starts to lose power.

To turn the air conditioner on or off:

Press POWER.

To select the mode:

To select the fan speed:

Press FAN SPEED for High, Medium or Low.

To raise the temperature:

Press the plus button to raise the temperature. Each time you

press or hold the plus button, the temperature will go up 1º until it

reaches 86°F (30°C).

To lower the temperature:

Press the minus button to lower the temperature. Each time you

press or hold the minus button, the temperature will go down 1º

until it reaches 64°F (18°C).

To set Timer for a 1- to 24-hour delay before air conditioner

is turned off (air conditioner must be On):

1. Press TIMER. Indicator light on air conditioner control panel

will flash.

2. Press the plus or minus button to change the delay time from

1 to 24 hours.

3. Press TIMER again or wait 10 seconds. Indicator light on air

conditioner control panel will remain on.

To set Timer to turn on air conditioner, keeping previous

settings:

1. Turn off air conditioner.
2. Press TIMER. Indicator light on air conditioner control panel

will flash.

3. Press the plus or minus button to change delay time (1 to

24 hours).

4. Press TIMER again or wait 10 seconds. Indicator light on air

conditioner control panel will remain on.

To set Timer to turn on air conditioner, changing the

previous settings:

1. Turn on air conditioner.
2. Adjust Mode to Cool, Fan Only, or Power Saver.
3. Adjust Fan Speed to High, Medium or Low.
4. Adjust temperature between 64°F (18ºC) and 86°F (30ºC).
5. Turn off air conditioner.
6. Press TIMER. Indicator light on air conditioner control panel

will flash.

7. Press the plus or minus button to change delay time (1 to

24 hours).

8. Press TIMER again or wait 10 seconds. Indicator light on air

conditioner control panel will remain on.

Press COOL, FAN or $ SAVER

Advertising