Friedrich CP18C30 - Manual (Page 6)

6
6
Installation Instructions
Unpacking
Remove packaging materials
�
Remove and dispose of/recycle packaging materials.
Remove tape and glue residue from surfaces before turning
on the air conditioner. Rub a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with warm water
and dry.
�
Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your air conditioner.
�
Handle air conditioner gently.
1. Remove the air conditioner from the carton and place it on
cardboard.
2. Remove shipping screws from the rear of the cabinet.
3. Remove the window lock bracket and screw from the air
conditioner and set aside.
4. Remove the ground screw and ground wire from the front of
the air conditioner base. Save the ground screw.
5. Pull on handles to slide air conditioner out of cabinet. Place
air conditioner on cardboard.
NOTE: Do not lift, push, pull or remove any expanded
polystyrene (foam) from inside the air conditioner. It is not
packing material.
A. Shipping screws
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
A
A. Window lock bracket screw
B. Window lock bracket
A. Green ground wire
B. Ground screw
A. Handles
A B
A
B
A