Falcon SUP1.0K-1C - Manual (Page 5)

CHAPTER 2 CHAPTER 2
Installation
Inspecting the Equipment
If any FALCON ® equipment has been damaged during shipment, keep
the shipping cartons and packing materials for the carrier and file a
claim for shipping damage. If you discover damage after acceptance,
file a claim for concealed damage.
To file a claim for shipping damage or concealed damage: 1) File with
the carrier within 15 days of receipt of the equipment; 2) Send a copy
of the damage claim within 15 days to the Falcon
® Service Department.
UPS Setup
1. Verify that the following is included in the UPS shipping carton:
UPS, Software CD, Domestic 120Vac Power Cord, European style
Schuko Power Cord, Owner's Manual, UPS/Computer Cable and
Battery connection jumper plug.
2. Verify that the UPS unit is to be used with the proper input voltage and
the equipment to be connected to it’s output is designed to operate
from a 120Vac source. If the UPS is to be connected to a 230Vac,
50Hz European source verify the connected equipment was designed
to operate from a 120Vac, 50Hz power source. This information is
stated on the nameplate label located on the model number label
located on rear panel of the unit.
3. This UPS has been shipped with the battery connection jumper
removed to meet new transportation regulations.
THE BATTERY CONNECTION JUMPER MUST BE INSTALLED
PRIOR TO PLUGGING IN AND ATTEMPTING TO TURN ON THE
UPS.
4. Select a suitable location for the UPS, near enough to the computer or
equipment to allow connection of the equipment power plug to the
receptacles located on the rear panel of the UPS.
5. If you are connecting the UPS to a PC Computer, you may want to
install the supplied UPSilon shutdown and management software on
your computer after connection the UPS interface cable to the RS-232
interface connector located on the UPS rear panel. Then connect the
mating end of the cable to an unused serial port located on the
computer rear panel. Before the UPS will be able to communicate
properly with your computer, install the supplied computer monitoring
and shutdown software.
IMPORTANT
4