Fujitsu Siemens Computers 19P2 - Manual (Page 20)

Colour monitor 19P2
12 - English A26361-K713-Z100-1-5E19
2 3
MENU
1 4
EXIT
1 = EXIT button
2 = Arrow buttons 3 = MENU button
4 = ON/OFF switch
The MENU button switches the OSD menu on and selects a function in the OSD menu.
The EXIT button deactivates the OSD menu or returns you from a submenu to its superior menu.
With the buttons ! or " you mark the icon for a function.
You make the settings for the selected function with the arrow keys $ , # , ! or " respectively
shown in the OSD menu.
Adjusting the brightness and contrast
If the OSD menu is not shown, you can directly open the setting window for brightness with the keys
$ or # and the setting window for contrast with the keys ! or " and make the settings.
i
You will increase the life of your screen if you adjust the contrast and brightness to
medium.
Brightness ( Brightness ): setting the overall brightness
Contrast: Setting the contrast between the foreground and background
The setting window disappears after a few seconds if no further setting is made. All changes are
stored automatically.