Fujitsu Siemens Computers 19P2 - Manual (Page 29)

Colour monitor 19P2
A26361-K713-Z100-1-5E19 English - 21
Colours are impure
Ê Degauss the monitor with the OSD menu (see " Operation of the monitor ").
White does not look white
Ê Set the colour temperature with the OSD menu (see " Operation of the monitor ").
Screen display has lines (Moiré), is dull or blurred
Ê Set the brightness and contrast (see " Operation of the monitor ").
Ê Degauss the monitor with the OSD menu (see " Operation of the monitor ").
Ê Set the moiré reduction with the OSD menu (see " Operation of the monitor ").
The screen display is flickering
Ê Set an ergonomic refresh rate ( ≥ 75 Hz) using the computer software (see documentation for
your computer or your graphics card).
A muffled noise can be heard after switch-on
The monitor is degaussed every time you switch it on. This produces the noise. There is no
malfunction.