Fujitsu Siemens Computers 19P2 - Manual (Page 26)

Colour monitor 19P2
18 - English A26361-K713-Z100-1-5E19
Electrical data
Video:
Synchronisation:
Horizontal frequency:
Refresh rate:
Maximum pixel rate:
Power supply:
analogue, positive, 0.7 Vpp, 75 Ohm
Separate Sync. TTL
Composite Sync. TTL/ Sync. on Green
30 kHz .... 96 kHz (multi-scanning)
50 Hz .... 160 Hz
207 MHz
switches automatically
100 V - 127 V, 50 Hz - 60 Hz ± 3 Hz, < 2 A
200 V -240 V, 50 Hz - 60 Hz
±
3 Hz, < 1 A
Power consumption:
(see power management):
< 100 W (ON, Normal mode)
< 3 W in the energy-saving mode (standby mode,
suspend mode and OFF mode)
Environmental conditions
Environment class 3K2, IEC 721
Rated range of operation:
Humidity:
Limit range of operation:
Humidity:
15 °C .... 35 °C
20 % .... 85 %
5 °C .... 40°C
20 % .... 85 %
Condensation must be avoided.
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications interface
between the monitor and the computer. If your computer is equipped with a VESA-DDC-compatible
VGA interface, it can automatically read the data for ensuring optimum operation from your monitor
and select the appropriate settings.
i
If the monitor 19P2 is not yet displayed in the list of monitors, you can select one of the
following monitors instead:
Fujitsu Siemens, Siemens or Siemens Nixdorf MCM 2109, MCM 2107, MCM 2105,
MCM 2102, MCM 1902, MCM 19P1/19P1N, MCM 17P1, MCM 17P2, 17P3, MCM 1702,
MCM 1703, MCM 1704, MCM 1705, MCM 1706, MCM 1707, x178