Fujitsu Siemens Computers 19P2 - Manual (Page 25)

Colour monitor 19P2
A26361-K713-Z100-1-5E19 English - 17
Notes on ergonomic colour adjustment
If you select colours for the display in your application programmes, take note of the information
below.
The primary colours blue and red on a dark background do not produce the minimum required
contrast of 3:1 and are therefore not suitable for continuous text and data entry.
When using several colours for characters and background and giving the primary colours full
modulation, you can obtain very suitable colour combinations (see the following table):
Background Characters
black white purple blue cyan green yellow red
black + + - + + + -
white + + + - - - +
purple + + - - - - -
blue - + - + - + -
cyan + - - + - - -
green + - - + - - -
yellow + - + + - - +
red - + - - - - +
+ Colour combination very suitable; light background colours are only suitable for devices
which are operated with a refresh rate of at least 75 Hz.
- Colour combination not suitable because colour locations are too close together, thin
characters are not identifiable or rigorous focusing is demanded of the human eye.
Technical data
Dimensions and weight
CRT:
Visible diagonals:
Dot pitch:
Maximal resolution:
Dimensions (W x H x D):
Weight:
48 cm (19“)
46 cm
0,26 mm
1280 x 1024 pixels
454 mm x 455 mm x 226 mm
20 kg
Accessories: Power cable (1.8 m)
Storable display modes: 20 (9 of which are preset)